TP-LINK RE655BE test: The WiFi 7 repeater perfectly to accompany a latest generation box

The TP-LINK RE655BE is a WiFi repeater that allows you to extend the cover of your wireless network by placing it halfway between your box. Nevertheless, router and the area to be covered. For example, To obtain optimal flows, it will be necessary to place it in an area where the wifi coverage is correct.

The RE655BE is a tp-link re655be test: wifi 7 large block 16 cm high by 11 cm wide for a depth of 5.5 cm once installed in its electrical outlet. However, Depliped antennas. Nevertheless, the RE655BE measures almost 35 cm high, a size which will require condemning the said plug, which must be found in a well-clear environment.

Its weight is also important since measured at 445 g on our tp-link re655be test: wifi 7 scale. Therefore, which means that the RE655BE tends to bow in the catch. Similarly, It is all the more true that the Type-C socket used by TP-Link does not fully fill the accommodation for electrical outlets. Therefore, is therefore less well maintained.

TP-Link affixed an RJ45 socket to the 2.5 GB/s standard on the right edge of the device. Therefore, In repeating mode. Meanwhile, this allows you to connect a computer, a game console or any other device requiring a wired connection. Similarly, In access point mode. Similarly, you can connect the re655be directly to the box or the router to create a new wireless network.

Above the RJ45 port. Meanwhile, there is a WPS button that allows you to quickly pair its devices with the repeater. Therefore, Just to its right, the Reset button resets the configuration zero.

Five seers stand on the left of the facade. Additionally, Therefore, They serve to inform the state of the repeater. Therefore, the reception of WiFi to repeat, as well as the condition of the three bands created: 2.4 GHz, 5 GHz and 6 GHz.

The Re655Be repeater supports the entire WiFi 7 (802.11be) with the frequency band of 6 GHz. the frequency strip width of 320 MHz, 4K-QAM modulation and the multi-link operation which reduces latency (MLO). It therefore operates on three aforementioned frequency bands: 2.4 GHz, 5 GHz and 6 GHz.

It offers theoretical flows of up to 688 Mb/s on the 2.4 GHz band, 2882 MB/s on the 5 GHz band and 5764 MB/s on the 6 GHz band.

In practice, real flow is half reduced. Indeed. the repeater must simultaneously communicate with the router (or the Internet box) and the device you use, which divides the bandwidth by two.

To install the TP-Link RE655Be repeater. you have tp-link re655be test: wifi 7 two options: use the TETH (Android, iOS) app or go through its accessible web interface via tplinkrepeater.net.

The installation procedure. which lasts only ten minutes, begins in the same way in both cases: you must first connect the repeater to an electrical outlet located near your internet box or main router.

Once the repeater light stops flashing, connect to the WiFi network he created (named TP-Link_extender). Then launch the application and follow the installation guide instructions. This will ask you for the passwords of WiFi networks that you want to extend. create three new distinct networks with the suffix _EXT.

After this configuration, you can disconnect the repeater to position it in a strategic location, ideally halfway between your box and the area that lacks wifi coverage. The APP TETHER will help you validate if the chosen location is suitable.

It is important to note that if you already have a TP-Link router compatible with OnemaSh technology. the repeater will automatically adopt the same network names (SSID) as the router, thus authorizing fluid roaming of your devices between the two access points.

Once the installation is completed, the TETHER application gives you total control over the device, making the web interface superfluous. You can manage all the rehearsal settings there. such as program the extinction of light indicators or define operating time slots.

Note that activating the MLO option is only available from the web administration interface and not in the APP TETHER.

The repeater does not include a parental control function. because this responsibility is generally left to the main router – such a control limited only to the extended network would actually be not very tp-link re655be test: wifi 7 coherent. It is nevertheless possible. via the application, to block access to certain devices or to assign them time slots of use.

To assess the performance of the TP-LINK RE655BE. we re-asserted the signals of 2.4, 5 and 6 GHz from a DECO BE85 to which we connected a laptop via an adapter to the 10 GB/S socket. In order to measure the flows. we make measurements with the OpenSpeedtest software and a laptop PC equipped with a Qualcomm WiFi 7 chip, but also a fixed desktop PC upstairs, connected with a PCIE card also equipped with a Qualcomm WiFi 7 chip.

The router tp-link re655be test: wifi 7 is positioned at an angle of the accommodation. the repeater plugged almost in the middle of the latter on an outlet 15 cm from the ground. We carry out a first measurement with the rehearsal near the router (point 1). another to 1 m from the rehearsal placed in the middle of the accommodation (point 2), a measurement in a bedroom about 5 m from the rehearsal with a carrier wall opposite the router (point 3), one more on the fixed PC on the floor through a concrete floor (point 4), then a last upstairs also, but above the first bed the weakest (point 5).

On the frequency band of 6 GHz. the RE655BE obtains as close as possible to the flows bordering on the 1800 MB/S, whether for download or televersing. In practice, this therefore corresponds to flow rates of 225 MB/s. Yes you have read correctly: the RE655BE is thus almost three times faster than its predecessor RE700X. which operates the WiFi 6e standard.

The flows are maintained as long as you stay in a good coverage area (point 1 to 3). As soon as we pass upstairs. the concrete slab of our test accommodation complicates the rehearsal task and reduces its flows to reach a little less than 500 Mb/s (62.5 MB/s), which remains above a repeater from the previous generation.

The 5 GHz frequency band offers first -rate flow rates as well. Although pure speed, we regularly exceed the 1500 Mb/s (187.5 MB/s) at the nearest. On our most distant point. the flows are largely sufficient to watch its SVOD services, surf and even download content with around 300 Mb/s measured, or 37.5 MB/s.

The 2.4 GHz frequency band is less at the party with tp-link re655be test: wifi 7 more or less stable speeds depending on the measurement point. We thus oscillate between 200 and 50 Mb/s, while the previous model varied more between 315 and 140 Mb/s. It must be said that the frequency band of 2.4 GHz is less. less used for performance, but remains essential for connected objects or capture in isolated corners of housing, the frequency of waves of 2.4 GHz crossing much better the different construction materials.

With its three frequency bands. its support for the WiFi 7 standard, the Re655be repeater is simply the best repeater of the moment in terms of performance. We were also able to activate the MLO in the web interface. which reduces latency, but does not offer more important flows than the frequency band of 6 GHz.