Elegoo Centauri Carbon test: our full opinion – 3D printers

Technical sheet – Elegoo centauri carbon test: our

With compact dimensions of 380 x 380 x 457 mm for a weight of 13.5 kg The Elegoo Centauri Carbon is an easy printer to integrate in a domestic workshop or even an apartment lounge. For example, Its printing volume of 220 x 220 x 250 mm offers a 12.1 liter workspace, sufficient for most personal and semi-professional printing projects.

This 3D printer uses FDM technology (melted wire deposit) with a corexy architecture which is distinguished by its fixed motors activating the head via crossed belts. Similarly, reducing the mobile masses thus allowing high printing speeds, superior precision and less vibrations than a classic Cartesian architecture. Moreover, The fully closed room allows optimal thermal control. Therefore, The maximum resolution reaches 0.1 mm in layer height, while the measurements reveal a remarkable precision of elegoo centauri carbon test: our 0.01835 mm in x and 0.02116 mm in Y with an average standard deviation of only 0.0138 mm.

The announced performance is impressive with a maximum speed of 500 mm/s and an acceleration of up to 20,000 mm/s², although the standard print speeds are rather between 150 and 300 mm/s for optimal daily use. Nevertheless, The machine accepts a wide range of materials including PLA. However, PETG, ABS, ASA, PA, PC and is particularly suitable for the reinforced filaments of carbon fibers thanks to its nozzle capable of reaching 320 ° C.

Modern connectivity includes double band Wi-Fi, USB port, 8 GB internal storage and automatic updates. Furthermore, This printer remains single -single without automatic filament change system.

elegoo centauri carbon test: our

Design and ergonomics – Elegoo centauri carbon test: our

Installed in my office, the Centauri Carbon detonates with my other printers. Furthermore, No more freezing orange of my old prusa. In addition, the white plastic of the Ender 3 – here, it is matt black that fits perfectly next to my Gaming PC setup. Similarly, My wife. however resistant to the noise of printers, even agreed that she stays in the living room as she is discreet! Therefore, The matt black finish associated with the robust extruded aluminum chassis gives an impression of solidity. Meanwhile, will integrate well in modern interiors. Moreover, The closed room with a transparent front door allows direct visual monitoring of prints while maintaining an optimal thermal control.

The commissioning constitutes a major highlight elegoo centauri carbon test: our of this printer. Meanwhile, Delivered pre-assembled. Similarly, calibrated and tested in the factory, it allows almost immersed use from unpacking and at the end of the initial calibration and the withdrawal of the 3 screws which maintain the tray during transport. Consequently, The integrated automatic leveling system and the plug-and-play configuration allow you to start printing in less than fifteen minutes.

Accessibility for maintenance is correct with direct access to the Direct Drive extrusion system. Nevertheless, a very easy change of filament. Consequently, The automatic nozzle cleaning system and purge ejection is particularly well thought out.

The maintenance tools provided and access to internal components are satisfactory. Furthermore, The printer being single -customer, the questions of multilayer ergonomics do not apply.

elegoo centauri carbon test: our &#13. Consequently,

Software and interface – Elegoo centauri carbon test: our

The Slicer (software that allows you to prepare the parts for printing) of Elegoo based on Orca Slicer is functional with a clear and intuitive interface. Pre-configured profiles for different types of filaments greatly facilitate use for beginners, while advanced parameters remain accessible to experienced users. It is possible to launch and follow the printing in real time directly from the “Machine” tab of the software. The integrated camera allows you to visually follow the progress of the manufacturing and create timelaps.

The printer user interface itself is successful thanks to its reactive and well-designed touch screen. The navigation in the menus is intuitive and the information and options displayed elegoo centauri carbon test: our during printing is clear and relevant.

Compatibility with third -party software remains limited, but functional. Although it is possible to use Cura. Prusaslicer, this requires a manual configuration of profiles and does not benefit from the same level of optimization as the manufacturer’s slicer. This limitation relating to third -party compatibility is harmful and constitutes an improvement axis for future updates.

Advanced connectivity and features

Modern connectivity options include stable and fast Wi-Fi on the two frequency bands. Elegoo Slicer software allows effective remote control with fluid file transfers and real -time monitoring.

Additional features considerably enrich the user experience. Automatic OTA updates maintain up -to -date firmware without manual intervention. The end of the filament detection system avoids failed impressions. while the recovery function after power cut protects against unexpected interruptions.

Tests d’impression

First test, first stress: will she succeed in the famous bench of the first time? After only 32 minutes of waiting (and a few worried glances), the verdict falls: it is a flawless! Even the portholes so delicate to print are perfectly clear.

The 20mm Xyz Calibration Cube reveals the very correct precision of the printer with measured dimensions of 20.02 x 19.97 x 20.01 mm. The right angles are perfectly respected and the dimensional regularity impressive.

The temperature tower that optimizes settings for different materials reveals an optimal temperature of 210 ° C for PLA. 240 ° C for PETG, with excellent thermal management thanks to the closed room.

The printing of a 12 cm Eiffel Tower demonstrates the printer’s capacities on complex elegoo centauri carbon test: our geometries. The printing succeeds without supports with architectural details well rendered and no sign of warping or deformation.

Electric consumption is reasonable with 180 to 220W in operation and only 15W on standby.

The night test: First night test in the living room: 45 dB announced, but what does it really give? My wife sleeps in the room next door, it’s the ultimate test! Result: not even woke up by the 8h impression. The closed design of the machine contributes greatly to this remarkable acoustic discretion.

The weekend challenge: Rainy weekend = printing marathon! 3 large parts for an underwater drone project in 2 days. Zero failure, elegoo centauri carbon test: our zero intervention. This machine amazed me with its constancy.

The surprise guest: When my neighbor (total novice) saw the printer turn, he wanted to try it. In 10 minutes, he launched his first impression via the interface. That’s a real plug-and-play machine!

Speed and productivity

Printing timekeepers confirm the good performance of the machine. A benchy is printed in 32 minutes in quality mode. 20 minutes in speed mode, while the 20mm cube only requires 12 minutes.

Comparison with competitors reveals performance superior to the Prusa MK4 on similar objects. comparable to the Bambu Lab A1 Mini and much better than the Creality printers of the same price range.

&#13.

Tests with different filaments

The tests with the PLA reveal an excellent grip elegoo centauri carbon test: our on the set and a perfect quality surface quality, deserving a note of 9 out of 10. PETG is also very well printed with good adhesion and respect for the transparency of the material.

The printing of flexible TPU is possible, but more delicate, requiring a significant speed reduction to avoid the stuffing. This limited but existing capacity deserves a note of 6 out of 10. The technical filaments constitute the strong point of this printer. particularly those reinforced with carbon fibers, as well as ABS and ASA which are well mastered thanks to the closed chamber.

Price and availability

The value for money of this printer is exceptional. The high performance obtained for a price of elegoo centauri carbon test: our 349.99 euros in France place this machine at the top of its category.

This printer represents a real progress in accessible 3D printing, succeeding in the bet to offer a closed corexy printer with high performance at an unbeatable price. Despite some software limitations. the absence of a multi -skill, it stands out as an excellent choice for 2025, particularly suitable for users favoring quality, ease of use and reliability.